Press Enter to execute the function associated to the field. To obtain default settings, press Enter. This field is grayed out under the following conditions: Three settings are allowed: SATA devices are not supported in these servers at this time. The Manage Array screen shown below is used to manage the current array. The array is made up of the maximum number of disks three.
|Date Added:||8 April 2012|
|File Size:||32.19 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To exit, press the Esc key and respond to the verification prompts. It is recommended that this field be set to the highest-priority SCSI identifier, which is 7. Indicates the order in which to scan SCSI identifiers on an adapter. When the Device Verify screen shown below appears, press Enter to begin the verify process. Alternate CHS Mapping utilizes an alternate, possibly less-efficient mapping that might be required if a device is moved between adapters from different vendors.
Executable items are indicated by highlighted text and a different background color. Enabled for illegal-configuration situations in which there is more than one array on this physical adapter.
Serial Attached SCSI BIOS Configuration Utility
In arrays consisting of different sized drives, excess space on larger drives is unusable. The Configuration Utility will pause while the array is being created.
Indicates the maximum synchronous data transfer rate, in mega transfers per second. Adapter removed from boot order. Graphical status bar that shows the current completion status of the operation. The BIOS is either not controlling the adapter or will discontinue control of the adapter upon reload.
The default value is 2 seconds, with choices between loogic and 10 seconds. If, while using it, you disable all of your controllers, pressing Ctrl-A or Ctrl-E on version 5. Changing this item will affect disk letter assignment s if more than one device is attached to an adapter.
Activating an array also causes all the remaining arrays found on the physical adapter to be deactivated.
Select your language
By doing this, it decreases reliability because the failure of any drive within the striped volume lssi in a complete loss of data. The Device Properties screen shown below displays information about a specific device.
The properties of the current volume are displayed. Reset Link Error Counts. For this type, select Erase Disk Delete. Press Y to start the synchronization, or N to cancel it. Appears when an adapter is removed from the system or relocated behind a PCI bridge. These messages may appear during the boot process:. This option is only available when the selected array is currently inactive. The first disk will be mirrored onto the second disk, so the data you want to keep must be on the first disk added to the volume.
To continue after displaying a message, specify No. The Manage Array screen shown below is used to manage the current array.
Currently defined values are:. When a Fusin 1 volume is deleted, the data is preserved on the primary disk. Specifies the default video mode for the Configuration utility. Provides static information text, which is typically the product title and version.
Some mostly newer devices run faster with disconnect enabled, while some mostly older devices run faster with disconnect disabled.
To manage the current array, press Enter when the Manage Array item is selected. Striped arrays do not support hotspares, so no modifications can be made to an array after it is created. There are several limitations when creating a RAID sdsi volume:.